Prophet CNC Forged Iron

YES…
An Advanced CNC Milled Forged Carbon Steel Iron CAN Be Affordable

You asked for it, we listened, and then we made it! Traditionalists often covet the soft feel upon impact that a forged carbon steel iron produces. We went one step further by harmoniously fusing modern game improvement features into the design – bringing the best of both worlds to produce the Dynacraft Prophet CNC iron.

This is a true forging produced from a solid, tubular billet of soft carbon steel.

Next, it goes through a 5 step forging process. The billet is heating then pressed into the rough shape using a huge mechanical press exerting several tons of force. This allows the rough shape to be stamped out. Through each successive step, it begins to look more like a finished iron. The basic shape of the club head along with a separate hosel is then welded together.

The heads are placed face down in a special fixture to hold them securely in place underneath a CNC machine to remove material in an exact manner that is programmed into the computer.

This allows for virtually any cavity shape that can be made through investment casting, even an undercut channel that traditional forging techniques are incapable of achieving. Depending upon the complexity of the cavity, the milling machine may take 10 to 20 minutes to route out a single cavity.

Therefore the CNC shop will be equipped with 10 or more milling machines and running at multiple shifts, sometimes around the clock, to produce any type of quantity.

The hosel is turned down with a lathe to ensure consistent diameter and finally the hosel drilled to accept a shaft.

The next steps all involve many hand operations as the faces are stamped or machined flat, stampings pressed in and the weight is reduced by grinding and sanding. Special care needs to be performed to make certain the radius of the sole or the general shape is replicated from one club to the next as all the hand operation can lead to greater inconsistencies than investment casting.

Afterwards, the heads go through additional polishing steps to ensure a smooth surface for the satin chrome electroplated to the surface to prevent rusting. The metallic emblem is added and lastly paint filled to finish the Prophet CNC irons ready to be delivery to customers around the world.

Item#	Face Material	Body Material	Hand	Club	Loft	Lie	Offset	Bounce	Std Clublength
FI1006A-003	1020 Carbon Steel	1020 Carbon Steel	RH	#3 Iron	21 d	59 d	5.3 mm	0 d	39 in
FI1006A-004	1020 Carbon Steel	1020 Carbon Steel	RH	#4 Iron	24 d	59.5 d	4.8 mm	1 d	38.5 in
FI1006A-005	1020 Carbon Steel	1020 Carbon Steel	RH	#5 Iron	27 d	60 d	4.3 mm	2 d	38 in
FI1006A-006	1020 Carbon Steel	1020 Carbon Steel	RH	#6 Iron	31 d	60.5 d	3.8 mm	3 d	37.5 in
FI1006A-007	1020 Carbon Steel	1020 Carbon Steel	RH	#7 Iron	35 d	61 d	3.3 mm	4 d	37 in
FI1006A-008	1020 Carbon Steel	1020 Carbon Steel	RH	#8 Iron	39 d	61.5 d	2.8 mm	5 d	36.5 in
FI1006A-009	1020 Carbon Steel	1020 Carbon Steel	RH	#9 Iron	43 d	62 d	2.3 mm	6 d	36 in
FI1006A-10P	1020 Carbon Steel	1020 Carbon Steel	RH	PW	47 d	62.5 d	1.8 mm	8 d	35.5 in
FI1006A-20S	1020 Carbon Steel	1020 Carbon Steel	RH	SW	56 d	63 d	1.3 mm	12 d	35.5 in