Avatar XMOI Titanium Driver

Not Just More MOI…XMOI

The design aim for the Dynacraft Avatar XMOI Driver was to create a driver that possessed the highest degree of forgiveness.

“Before it came to the final approved version this model went through several – and I mean several transformations,” states Technical Director Jeff Summitt. “The goal was to make this project the highest moment of inertia (MOI) design we had to date. In the early part of summer ’08, we finally produced a prototype head which had a MOI of over 5400g-cm2.”

“We spent valuable time obtaining feedback from various golfers. Truthfully, not one of those testing the heads felt the higher MOI produced any more accuracy than our latest design, in fact the results may have shown more dispersion. What you may gain in the MOI, you compromise in other areas such as sound, feel and more importantly how it looked at address. With the suggestions we received from our panel we went back to the drawing board and implemented several changes. In the end, the Dynacraft Avatar XMOI Driver did not look like what was originally envisioned, but we ended up with an extremely forgiving, playable, visually appealing and yet still high MOI driver.”

The Dynacraft Avatar XMOI Driver is available in RH 10.5 and 12 degrees.

Item#	Face Material	Body Material	Hand	Club	Loft	Lie	Face Angle	Volume	Std Clublength
TM100125-001-1050	6-4 Titanium	100% Titanium	RH	Driver	10.5 d	59 d	1 d Closed	460 cc	45 in
TM100125-001-1200	6-4 Titanium	100% Titanium	RH	Driver	12 d	59 d	1 d Closed	460 cc	45 in