Avatar XMOI Fairway Wood

Want Extreme Performance?

The Avatar XMOI series takes MOI to the extreme.

The Avatar XMOI fairway woods are the epitome of progressive thinking. Built to bridge the gap from the extra large driver to the matching transitional hybrids, the shape is proportionally sized. The 3-wood being the hardest to hit, it is the largest to provide maximum forgiveness. Then the 5 and 7 woods are gradually scaled down to provide more than enough forgiveness. The shallow face, coupled with our VCT (variable crown thickness) places weight low and deep within the head for superior results.

“As you progress from the 3 to 7 wood the volumes of ordinary fairway woods diminish because the height is lowered and they are more lofted to consume less volume. But in general, the heel-to-toe and face-to-back dimensions are relatively the same throughout the set,” states Technical Director Jeff Summitt. “The Avatar XMOI fairway woods are designed differently from the typical fairway wood. We designed the 3 wood to be the largest in volume in the set then the 5 and 7 woods are gradually scaled down to provide more than enough forgiveness. The shallow face, coupled with our VCT (variable crown thickness) places weight low and deep within the head for superior results.”

For most golfers, an extra large high-lofted fairway wood (like a #7 wood) appears too large at address. Hireko decreased the size proportionately on the Dynacraft XMOI Fairways so they look the correct size and at the same time still provide more than adequate game improvement and cohesive appearance.

In addition to the variable size, the Avatar XMOI fairways feature our exclusive Variable Crown Technology (VCT) where the crowns are cast as little as 0.5mm thick (only 5 sheets of paper thick). This allows the unwanted weight to be repositioned deep within the head. Coupled with the sleek, lower profile this makes the XMOI Fairway Woods easy to get the ball airborne not to mention straight because of the extreme moment of inertia.

The Dynacraft Avatar XMOI Fairway Woods are available in RH 3, 5 and 7 woods.

Item#	Face Material	Body Material	Hand	Club	Loft	Lie	Face Angle	Volume	Std Clublength
M1006-003-1600	431 Stainless Steel	431 Stainless Steel	RH	#3 Wood	16 d	59 d	Square	180 cc	43 in
M1006-005-1900	431 Stainless Steel	431 Stainless Steel	RH	#5 Wood	19 d	59.5 d	Square	165 cc	42 in
M1006-007-2200	431 Stainless Steel	431 Stainless Steel	RH	#7 Wood	22 d	60 d	Square	160 cc	41 in